FM13V/FM13X Operator’s Manual Overview - 3
Intended Use
Intended Use
The FM13V/FM13X is a platform-mounted venturi drilling fluid unit capable of mixing and transferring fluid
under pressure to the drilling unit. It can be equipped with 500-gal (1893-L) or 950-gal (3596-L) tank. It is
intended for operation in ambient temperatures from 0° to 115°F (-18° to 46°C). Use in any other way is
considered contrary to the intended use.
The FM13V/FM13X can be used with Ditch Witch drilling units and locating equipment. It should be
operated, serviced, and repaired only by persons familiar with its particular characteristics and acquainted
with the relevant safety procedures.
Unit Components
1. metering plate
2. bag ripper
3. pump
4. engine
5. base
6. suction wand
7. dry chemical hopper
8. platform
To Next Page
Loading...
