RT80Q Operator’s Manual Service - 159
10 Hour
Check Plow Arm Pins and Bushings
Check plow arm pins and bushings every 10
hours. Tighten as needed.
Check Plow Connector Pivots
Visually check pivots every 10 hours for wear or
damage.
Check Attachment Mounting Bolts
Check mounting bolts every 10 hours and tighten
as necessary to keep bolts and other fasteners
tight. Check for looseness or wear. Apply Loctite
271
®
adhesive. Check that bolts are tightened to
200 ft•lb (271 N•m).
t33om024w.eps
t33om025w.eps
To Next Page
Loading...
