Specifications - 190 RT80Q Operator’s Manual
RT80Q Tractor
Unless otherwise specified, all figures are for standard equipment only. Specifications are called out according to SAE recommended
procedures. Due to selected options, delivered equipment may not necessarily match that described. Specifications are general and
subject to change without notice. If exact measurements are required, equipment should be weighed and measured.
Fluid Capacities U.S. Metric
Fuel tank 30 gal 114 L
Engine oil 8 qt 7.6 L
Hydraulic reservoir 14 gal 53 L
Hydraulic system 20 gal 76 L
Cooling system 14 qt 13.3 L
Battery (2 used)
Group 78U, SAE res. cap 110 min., SAE cold crank @ 0° F (-18° C), 800 amp
Auxiliary power outlet - 12 volt, 10 amp
Vibration Level
Average vibration transmitted to the operator’s hand and whole body while plowing is 5.15 m/s
2
and
0.58 m/s
2
respectively.
Operator seat complies with ISO 7096.
Noise Levels
Operator ear sound pressure level is 96 dBa per ISO 6394.
Exterior sound power level is 110 dBa per ISO 6393.
To Next Page
Loading...
Need help?
General
