Ditch Witch SK752 - Engine Oil Temperature Chart; Approved Coolant Specifications

Service - 62 SK752 Operator’s Manual
Startup/10 Hour
Startup/10 Hour
Check Engine Oil Level
Check engine oil level at dipstick opening (1) at
startup and every 10 hours. Raise lift arms and
install safety supports. See “Working under
Raised Lift Arms” on page 58. Oil level should be
at top of marking. If low, add DEO at fill (2). Check
with unit on level surface and at least 15 minutes
after stopping engine.
Location Task Notes
Check engine oil level DEO
Check hydraulic fluid level THF
Check brake operation
Check lug nut torque 88-95 ft•lb (108-129 N•m)
Check track tension MPG
Check engine coolant level DEAC
Check engine air filter service indicator
Check hydraulic hoses
IMPORTANT: Use oil specified in “Engine Oil
Temperature Chart” on page 60.
t35om009w.eps
1
2