Ditch Witch SK800 User Manual

SK800 Operator’s Manual Contents - 9
Contents
Overview 1
Machine serial number, information about the type of work this machine is designed
to perform, basic machine components, and how to use this manual
Foreword 7
Part number, revision level, and publication date of this manual, and factory contact
information
Safety 11
Machine safety alerts and emergency procedures
Prepare 19
Procedures for preparing jobsite, preparing operator, and preparing equipment
Controls 31
Machine controls, gauges, and indicators and how to use them
Drive 41
Procedures for startup, cold start, driving, and shutdown
Transport 47
Procedures for lifting, hauling, and retrieving
Complete the Job 55
Procedures for restoring the jobsite and rinsing and storing equipment
Maintenance 57
Maintenance intervals and instructions for this machine including lubrication,
replacement of wear items, and basic maintenance
Specifications 79
Machine specifications including weights, measurements, power ratings, and fluid
capacities

Ditch Witch SK800 Specifications

General

Engine Make	Kubota
Engine Model	D1105
Travel Speed	4.7 mph
Engine Manufacturer	Kubota
Number of Cylinders	3
Engine Power	24.8 hp
Operating Capacity	800 lb
Hinge Pin Height	83 inches
Width	48 in
Gross Power	24.8 hp
Rated Operating Capacity (SAE)	800 lbs
Ground Speed - Forward	4.7 mph
Height to Hinge Pin	83 inches
Loader Lift Height	83 inches
Displacement	68.5 cu in
Pump Flow	14.8 gpm