Ditch Witch SK800 User Manual

SK800 Operator’s Manual Foreword - 7
Foreword
This manual is an important part of your equipment. It provides safety information and operation
instructions to help maintain your Ditch Witch equipment.
Read this manual before using your equipment. Keep it with the equipment at all times for future
reference. If you sell your equipment, be sure to give this manual to the new owner.
If you need a replacement copy, contact your Ditch Witch dealer. If you need assistance in locating a
dealer, visit our website at www.ditchwitch.com or write to the following address:
The Charles Machine Works, Inc.
ATTN: Marketing Department
PO Box 66
Perry, OK 73077-0066
USA
The descriptions and specifications in this manual are subject to change without notice. The Charles
Machine Works, Inc. reserves the right to improve equipment. Some product improvements may have
taken place after this manual was published. For the latest information on Ditch Witch equipment, see
your Ditch Witch dealer.
Thank you for buying and using Ditch Witch equipment.

Ditch Witch SK800 Specifications

General

Engine Make	Kubota
Engine Model	D1105
Travel Speed	4.7 mph
Engine Manufacturer	Kubota
Number of Cylinders	3
Engine Power	24.8 hp
Operating Capacity	800 lb
Hinge Pin Height	83 inches
Width	48 in
Gross Power	24.8 hp
Rated Operating Capacity (SAE)	800 lbs
Ground Speed - Forward	4.7 mph
Height to Hinge Pin	83 inches
Loader Lift Height	83 inches
Displacement	68.5 cu in
Pump Flow	14.8 gpm