16
MAINTENANCE
Warning! Read and understand the safety
chapter before you do maintenance on the product.
Warning! Disconnect the power plug from the
power source before you do maintenance.
To Clean the Product
• Clean product with a clean and dry cloth.
• Clean the air vents with a brush. Make sure that the
air vents are not blocked.
Caution! Do not use water to clean the product.
Water can enter the product and cause short circuit
or damage to the product.
To Examine the Product for Damage
• Examine that the cord is not damaged.
• Examine the connections between the projector and
the adapter. Also examine the connection between
the adapter and the power outlet.
To Store the Product
• Before storage, let the projector cool completely.
• Disconnect the adapter from the projector during
storage.
• Attach the cord covers to the beam during storage.
• Preferably store the product in mounted position set
up at the work area. Alternatively store the product
leaning against the wall in a storage area with the
projector detached.
- The telescoping section can be locked in
compressed position, if needed.
• Store the product indoors and at room temperature.
To Next Page
Loading...