DiversiTech International Ltd.
Glaisdale Drive East, NG8 4LY
Nottingham United Kingdom
Email sales@pumph.co.uk
Phone +44(0)115 900 5858
25
FOR FURTHER INSTALLATION ADVICE PLEASE CALL THE TECHNICAL SUPPORT HELPLINE ON 0115 900 5858.
MAINTENANCE
• Always unplug the unit before cleaning or servicing.
• DO NOT use ammable liquids or chemicals to clean the unit.
• DO NOT wash the unit under running water. Doing so causes electrical danger.
• DO NOT operate the machine if the power supply was damaged during cleaning. A
damaged power cord must be replaced with a new cord from the manufacturer.
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry, lint-
free cloth.
REMOVAL
• This unit has upper and lower lters. Take the upper
lter out along the the arrow direction. Remove the
lower lter by loosening the screw(if any), taking out the
lter as shown. Cleaning
• Wash the air lter by immersing it gently in warm water(
about 40 C/104 F ) with a neutral detergent. Rinse the
lter and dry it in a shady place.
MOUNTING
• Install the upper air lter after cleaning , and install the
lower lter by using the screw (if any)
MAINTENANCE TIPS
• Be sure to clean the air lter every 2 weeks for optimal
performance.
• The water collection tray should be drained immediately
after P1 error occurs, and before storage to prevent
mold
• In households with animals, you will have to periodically
wipe down the grill to prevent blocked airow due to
animal hair.
SAFETY PRECAUTIONS
UNIT CLEANING
AIR FILTER CLEANING
CAUTION:
DO NOT operate the unit without lter
because dirt and lint will clog it and
reduce performance.
PAC-H-12
To Next Page
Loading...