10
Dixie Chopper • 6302 E. County Road 100 N. • Coatesville, IN • 46121 • www.dixiechopper.com
Specifi cations
Magnum 2750 (cont’d)
Mower Deck
•Welded baffl es
•Electric clutch
•Deck height adjusts straight up and down so pitch is always constant
•Floating deck mounted to rigid frame, (does not run on the ground)
•Deck rollers to prevent scalping
•Keyless sealed spindle
•1/1/4” effective diameter spindle shafts with self-tightening spindle assembly
Deck Materials
•Ten (10) gauge shell (.135” thickness)
•Seven (7) gauge top plate (.187” thickness)
•One-piece cast iron deck spindle housing
•Vented, split 3/16” steel deep-groove pulleys
Tires/Wheels
•Rear: 22” x 10” x 8” Turf Tech tubeless 4-ply rating (6-8 lbs air pressure)
•Front: 13” x 6.5” x 6” tubeless 4-ply rating
Ground Speed
•0-9 mph forward and reverse
Cutting Height
•1”-5”
Cut Width
•50”
Machine Width
•54”
Length
•80”
Height
•Roll bar down 49”
•Roll bar up 70”
Weight
•889 lbs
Warranty
•Three-year bumper to bumper (Two year parts and labor, 3rd year parts only)
•Two-year on Briggs & Stratton engine*
•Lifetime on front caster bearings
•Lifetime on steering linkages and levers against breakage
•Three-year deck spindles
•Dixie Chopper meets and exceeds all ANSI standards
* See Authorized Dixie Chopper Dealer for details
• Specifi cations are subject to change
To Next Page
Loading...
