SIID CONTROLLER PROGRAMING
Page 12 of 13
"NA" - Note Acceptor Test
Use this test to check acceptor functions.
Insert note. The value of note will be reflected on display.
Press & hold Select Button 1: Displays the Note Acceptor setting. ("LL" - low level, "HL" -
high level or "MDB" - multi-drop note acceptor)
Press & hold Select Button 2: Stacks the note and cancels the credit shown on display.
Press & hold Select Button 3: Returns the note and cancels the credit shown on display.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
"DSP" - Display Test
Press any select button and the display segments will illuminate in a scrolling manner, while
blinking the exact change LED.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
"VERS" - Version of Software
Press any select button and the display will scroll the software revision level in the control
box. Example: ###.## represents the installed software revision.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
"VNDR" - Vender Identification
Press any select button and the display will show the vender type, that the software has
determined, based on the select panel harness input. The vender types are:
"00" - Coke Venders
"01" - Pepsi and Generic Venders
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
RTN - RETURN TO MAIN MENU
Press & hold select buttons 1 & 2 simultaneously to return to "SE- ".
Press & hold select button 1 to return to "DIAG".
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
AUTO - Auto Testing
This function is used in Dixie-Narco’s manufacturing process and is not intended for use in the field. Its
purpose is a self-test routine to check the SIID components listed. For further details contact Dixie-Narco
Factory Service.
A. Control Box D. Motors, Vend Switches
B. Select Switch Harness E. Note Acceptors
C. Sold Out Switches F. Coin Mech
The operator will manipulate switches, run motors, and insert money while the SIID control box monitors all these
functions. If any errors are found, they will be logged and displayed to the operator on the display.
To Next Page
Loading...
