To Next PageTo Next Page
Need help?Do you have a question about the Dixie Narco DNCB 501E and is the answer not in the manual?
Guidelines and warnings for safe operation and maintenance of the vending machine.
Details on the necessary electrical specifications for operating the vending machine.
Critical safety instructions for properly grounding the vending machine.
How to adjust the temperature control for colder or warmer product.
Detailed explanation of the vending cycle for single price venders.
Step-by-step breakdown of the single price vending operation.
Detailed sequence for SIID venders using Escrow to Price.
Detailed sequence for SIID venders using Escrow to Select/Last Bill.
Operational flow for SIID coin mechs: Escrow to Select/No Bill Escrow (E-S4).
Detailed sequence for SIID venders using Escrow to Select/No Bill.
Troubleshooting common vending issues related to single price venders.
Troubleshooting guide when the vender accepts coins but fails to vend specific selections.
Troubleshooting steps when the vender accepts coins but does not vend at all.
Diagnosing issues where only one column fails to vend after accepting coins.
Troubleshooting steps when the coin changer rejects all valid coins.
Comprehensive troubleshooting guide for SIID vending system issues.
Troubleshooting problems related to coin and currency acceptance in SIID venders.
Diagnosing issues with the SIID vender's sold-out message functionality.
Troubleshooting for the SIID vender's select panel and display.
Flowchart for diagnosing '1-1' scrolling issues on the select panel display.
Flowchart for diagnosing problems entering the menu or diagnostic menu.
Flowchart for diagnosing issues with non-functional select switches.
Flowchart for diagnosing when the vender does not recognize a sold-out column.
Diagnosing issues with USA low-level note acceptors not taking notes.
Identifies potential causes for the compressor failing to run.
Troubleshooting when product is hot due to compressor issues.
Diagnosing why the compressor starts but fails to maintain operation.
Troubleshooting when the product is cold but not sufficiently chilled.
Identifies causes for the compressor running without cooling the product.
Troubleshooting when the product is excessively cold or frozen.
General| Manufacturer | Dixie Narco |
|---|---|
| Model | DNCB 501E |
| Type | Beverage Vending Machine |
| Category | Vending machines |
| Beverage | Cans and Bottles |
| Capacity | Up to 501 cans |
| Selections | 9 |
| Selection Columns | 9 |
| Temperature Range | 34-40°F |
| Compressor | 1/3 HP |
| Display | LED Display |
| Construction | Steel Cabinet |
| Power | 115V, 60Hz |
| Cooling System | Refrigerated |
| Payment Options | Coin mechanism |
