Need help?Do you have a question about the Dixie Narco DNCB 348 and is the answer not in the manual?
Essential safety guidelines for operating and maintaining the vending machine.
Step-by-step instructions for installing and setting up the SIID vending machine.
Information on power requirements, grounding, and electrical safety precautions.
Instructions for installing and setting up a coin changer in the vending machine.
Guidance on selecting an appropriate location and positioning the vending machine.
Instructions for properly loading products into the vending machine columns.
Connecting to hand-held devices for data exchange using DEX/UCS protocol.
Methods for programming the vender via the select panel or DEX hand-held.
Accessing historical and resettable sales and cash data through the controller.
Retrieving extensive audit data electronically using portable data collection devices.
Explains Normal Mode and System Set-up/Audit/Diagnostics Mode operations.
Overview of the main programming menu and its primary functions.
Details on configuring vender settings for optimal location performance.
Procedures for diagnosing and troubleshooting vender operational issues.
How to adjust temperature settings for optimal product cooling.
Common problems related to product dispensing, sold-out status, and column jackpots.
Troubleshooting steps for power failures, motor malfunctions, and fuse issues.
Resolving problems with coin/bill acceptance, validator function, and change payout.
Information on configuring bill acceptors for $1 and $5 bill acceptance.
Resolving issues with the display not functioning, incorrect prices, or memory loss.
Troubleshooting steps when fuses blow, indicating potential electrical faults.
Detailed descriptions of mechanical parts like compressors, condensers, and fans.
Explanations of electrical parts such as temperature controls and overload assemblies.
Components of the coin chute, coin return, and changer mechanisms.
Parts that constitute the select panel, including buttons, switches, and retainers.
Wiring harnesses for vend motors, DEX interface, and related functions.
Parts comprising the two-bar linkage and drive arm assembly.
Components related to the vend motor, its cams, and associated assemblies.
Vend motor switches, insulators, and rotors for product dispensing.
Parts for the product oscillator, package retainers, and sold-out switches.
Identifies different complete refrigeration system configurations available.
Parts related to the compressor, including its harness and mounting hardware.
Parts associated with the condenser, such as base plates, fan motors, and blades.
Components for managing condensate, including drain pans, tubes, and hoses.
Electrical parts like relays, capacitors, temperature controls, and wiring harnesses.
The main control board and display board assemblies.
Door switches, controller software (EPROM), transformers, and fuses.
General| Manufacturer | Dixie Narco |
|---|---|
| Model | DNCB 348 |
| Category | Vending Machines |
| Type | Beverage Vending Machine |
| Capacity | 348 cans |
| Power Supply | 115V, 60Hz |
| Payment Options | Coin |
To Next Page