Important: Under certain conditions, if one of these coins is accepted and escrow return is done, the controller may not
be able to pay back the credit as displayed and that coin will be lost.
To show current "SCE" condition:
Press any select button and the display will show the current setting.
To change the "SCE" condition:
Press and hold Select Button 1 to turn "SCE" on. Display will show "ON".
Press and hold Select Button 2 to turn "SCE" off. Display will show "OFF".
Press and hold Select Buttons 1 and 2 simultaneously to move to the next item on the menu.
COIN – COIN RULES
This function is used to allow the exact change light to turn on when appropriate as related to coin tube status or to set
the exact change light to never turn on which will allow bills and coins to be accepted regardless of the tube level status
of the coin mech.
To show current "COIN" condition:
Press any select button and the display will show the current setting.
To change the "COIN" condition:
Press and hold Select Button 1 to turn "COIN" on. Display will show "ON".
Press and hold Select Button 2 to turn "COIN" off. Display will show "OFF".
Press and hold Select Buttons 1 and 2 simultaneously to move to the next item on the menu.
SSM – SCROLLING MESSAGE MODE
This function is used to turn on a scrolling message "ICE COLD DRINKS".
To show current "SSM" condition:
Press any select button and the display will show the current setting.
To change the "SSM" condition:
Press and hold Select Button 1 to turn "SSM" on. Display will show "ON".
Press and hold Select Button 2 to turn "SSM" off. Display will show "OFF".
Press and hold Select Buttons 1 and 2 simultaneously to move to the next item on the menu.
MV – MULTI VEND
This function, when turned on, allows credit to be retained after a vend so the customer can vend from another selection.
(i.e. .50¢ vend price, put in $1.00, push a select button and vends, 50¢ still shows on display, push a second selection
button and vends). Credit is cancelled after 5 minutes of inactivity. Note: If "MV" is turned on, "COIN" will automatically
turn coin rules off. There is unlimited acceptance. If a customer wants their credit (money) back, the escrow lever must
be pressed. To show current "MV" condition, press any select buttons and the display will show the current setting.
To change the "MV" condition:
Press and hold Select Button 1 to turn "MV" on. Display will show "ON".
Press and hold Select Button 2 to turn "MV" off. Display will show "OFF".
Press and hold Select Buttons 1 and 2 simultaneously to move to the next item on the menu.
RTN - RETURN
This function is used to return to the User Options Menu.
Press select buttons 1 & 2 simultaneously to return to "STS ".
Press select button 1 to return to "USER".
Press and hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
DIAG - DIAGNOSTICS MENU
This function allows you to systematically diagnose problems related to the vender. To move to "AUTO" press select
buttons 1 & 2 simultaneously, to enter sub-menu press select button 1. The following are sub-menus of Diagnostics
Menu: "SE- ", "SP- ", "SW- ", "MT- ", "CM, "NA", "DSP", "VERS", "VNDR", and "RTN".
To Next Page
Loading...
