MOVE THROUGH MENU: Press select buttons 1 & 2 simultaneously to scroll down through the menu.
While scrolling down through menu, release, press select buttons 1 & 2
simultaneously to scroll up through menu.
ENTER SUB-MENU: Press and hold select button 1 to enter a sub-menu.
EXIT SUB-MENU: With "RTN" on display, press and hold select button 1 to exit a sub-menu.
EXIT SYSTEM SET-UP/AUDIT/DIAGNOSTICS MODE:
Closing the inner door or a two-minute inactivity time-out will exit the system set-up/audit/diagnostics mode.
FRONT PANEL PROGRAMMING
SYSTEM SET-UP/AUDIT/DIAGNOSTICS MENU
HD – HISTORICAL DATA
This section shows the user the vender accounting over the life of the vender. Use the following select buttons to view
the total sales in dollars, total number of vends and the total number of vends for each selection.
Press Select Button 1: Shows the historical total cash sales for the life of the vender.
Press Select Button 2: Shows the historical total number of vends.
Press Select Button 3: Shows the historical number of vends by selection. Each selection automatically scrolls
across the display.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
RD – RESETTABLE DATA
This section shows the user the vender accounting data since the time of the last counter reset. This data can be reset
either from this menu or by a DEX interrogation.
Press Select Button 1: Shows the total cash collected since the last counter reset.
Press Select Button 2: Shows the total number of vends since the last counter reset.
Press Select Button 3: Shows the total number of vends by selection since the last counter reset. Each
selection automatically scrolls across the display.
Press Select Button 4: This button zeros the resettable data described above. Hold button "4" for 5
seconds and "COUNTERS RESET" will be displayed. At this time, all resettable
data will return to "0".
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
S-P - SET PRICE
This function is used to set the price of each selection. When a select button is pressed, the price for that selection will
be displayed. If the button is held in, the price will increment or decrement. To change from increment to decrement,
release the select button and press it again. To set all selections for the same price: set desired vend price on select
button #1, then simultaneously press and hold select buttons 3 & 4 for five seconds, this will change the vend price of all
selections, both primary and secondary, to the price programmed to select button #1.
Note: The SIID's multi-pricing capability allows you to set all selections to any price in the range of $0.00 to $99.95.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
C-D - COIN DUMP/COIN FILL MODE
COIN DUMP:
This section is used to dump coins from the coin mechanism while in "C-D" mode.
Press & hold Select Button 1: Dump Nickels.
Press & hold Select Button 2: Dump Dimes.
Press & hold Select Button 3: Dump Quarters.
Press & hold Select Button 4: Dump 4
th
tube in 4 tube changers.
To Next Page
Loading...
