Dixie Narco DNCB 348 - Product Shimming and Cams; Product Shimming

497,071,000.03 - T-Models
Sold Out Spring
#901,700,740.01
Sold-Out Switch Assy. Snap In
#804,100,750.01
(Insulator and Switch are one piece)
VEND MOTOR NARROW COLUMN
Mounted on the Vender with the Vend Motor Switch on the underside (See Fig. 1). The shaft of the Vend Motor slides
into a slot in the Vend Rotor (See Fig. 2).
Vend Motor Switch
#804,100,730.01
Vend Rotor
#801,201,211.61 - 1¼"
#801,201,220.01 - T Models, Wide
#801,201,230.01 - T Models, Narrow
PRODUCT SHIMMING
Refer to the appropriate technical bulletin for proper set-up and vending procedures. Listed are a few of the more widely
used Technical Bulletins relating to shimming.
TB 450 Miscellaneous Worldwide Can Shimming, Shimless Stack Series 90
TB 451 Miscellaneous Worldwide Plastic Bottle Shimming, T-Models
Sold-Out Paddle
Wide and Narrow
#432,070,190.13
Fig. 2