SIID CONTROLLER PROGRAMING
Page 3 of 13
STS - SPACE TO SALES
To view the space to sales condition, press any select button to display the current columns assigned to that select
button.
To change space to sales condition:
To Add Selection:
Press Service Switch, "ADD" will be displayed. Note: Pressing the service switch will toggle
between add and delete. A 10 second inactivity time-out will return to "STS". Press and hold
any select button, whichever select button you are holding is the select button the additional
column will be assigned. While holding the select button, the display will read "ADD #" and the
selection will increment from 1 to 10. Release select button when the desired column # to be
added is displayed. A message will scroll across the display telling you what column will be
assigned to the button you were holding. Press service switch to complete space to sales
decision and re-enter service mode.
To Remove Selection:
Press Service Switch, "ADD" will be displayed, press service switch again and "DEL" will be
displayed. Note: Pressing the service switch will toggle between add and delete. A 10
second inactivity time-out will return to "STS". Press and hold any select button, the select
button you are holding is the select button from which the additional column will be removed.
While holding select button, the display will read "DEL #" and the selections will increment
from 1 to 10. Release select button when the desired column # to be removed is displayed. A
message will scroll across the display telling you what column will be deleted from the button
you were holding. Press Service Switch to complete space to sales decision and re-enter
service mode.
NOTE: Only one space to sales change may be made at a time. The service switch must be pressed before
and after each change.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
TIME - TIME
To display time, press and let go of any select button. Time will be displayed in military time (24 hour clock). To
change time, press and hold select button 1 or 2, the time will increment or decrement. To change from increment to
decrement, release the select button and press it again.
To change time:
Press & hold Select button 1: set hours.
Press & hold Select button 2: set Minutes.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
DATE - DATE
To view date, press and let go of select button 1 or 2 to display month and day. Month and day will be displayed as
"X.YY" where "X" represents the month and "YY" represents the day. Press and let go of button "3" to display day of
week, press and let go of button "4" to display year.
To change date:
Press & hold Select Button 1: set Month
Press & hold Select Button 2: set Day
Press & hold Select Button 3: set Day Of Week
Sunday 1 Thursday 5
Monday 2 Friday 6
Tuesday 3 Saturday 7
Wednesday 4
Press & hold Select Button 4: set Year
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
To Next Page
Loading...
