dji A3 Quick Start Guide

A3
/
A3 Pro
Quick Start Guide
EN
©
2017 DJI All Rights Reserved.
3
1. Product Prole
Introduction
The DJI
TM
A3 series is a reliable and robust ight control system that is ideal for a wide range of multi-rotor
aerial platforms. It uses advanced sensor fusion algorithms and a redundant design to maintain complete
stability and integrity of the aerial system.
The A3 series is fully compatible with the DJI Onboard and Mobile SDKs, allowing developers to optimize the
system for specic applications. When used with the DJI Lightbridge 2, it provides direct access to DJI GO
features including Intelligent Flight Modes.
With all essential components integrated into the A3 ight controller (including the IMU, barometer and data
recorder), the device is powerful and highly compact. The A3 can be upgraded to the A3 Pro by installing two
upgrade kits. The A3 Pro’s three GPS modules and IMUs add triple modular redundancy to greatly reduce the
risk of system failure.
Features
Basic Flight Modes
P-Mode (Positioning)
Atti Mode (Attitude)
F-Mode (Function)
Manual mode
DJI GO
App
Intelligent Flight Modes
Waypoints and Point of Interest (POI)
Course Lock and Home Lock
(Requires the DJI GO App and DJI Lightbridge 2.)
DJI SDKs
Fully compatible with the Onboard SDK and
Mobile SDK.
Developers Website:
https://developer.dji.com
Ultimate Reliability
A3 Pro supports triple
modular redundancy.

dji A3 Specifications

Flight Performance

hovering accuracy (vertical)	±0.5 m
hovering accuracy (horizontal)	±2 m
max wind resistance	10 m/s
max yaw angular velocity	150°/s
max pitch angle	35°
max ascent velocity	6 m/s
max descent velocity	6 m/s

Power and Environment

power consumption	Max 21 W (Typical Value: 0.41 A @ 51 V)
operating temperature	14° to 113° F (-10° to 45° C)