dji A3 Quick Start Guide

A3
/
A3 Pro
Quick Start Guide
EN
6
©
2017 DJI All Rights Reserved.
Strictly follow the provided guidelines.
Failure to do so may lead to unexpected
ight behavior or serious accidents.
3. Installation
Set Up the System
Watch the video tutorial for an overview
of the installation process.
Refer to the “Installation” section of the
user manual for detailed procedures.
Congure the Parameters
Watch the video tutorial for a brief
walkthrough.
Then launch DJI Assistant 2 and follow
the hints.
DJI
Assistant 2
LED Blinking Patterns
Refer to the “LED Indicator” section of the
user manual for a detailed description of
blinking patterns.
Fly Safe
It is important to understand basic ight
guidelines for the safety of both you and those
around you. Refer to the Disclaimer and Safety
Guidelines for more information.
No Fly Zones
More information at:
http://www.dji.com/ysafe/no-y
※
This Quick Start Guide is subject to change without prior notice.
4. Specications
Refer to the “Appendix” section of the user manual for the full specications.
●
Built-in Functions
Basic Flight Modes P-mode (Positioning); Atti mode / A-mode (Attitude); F-mode (Function);
Manual mode
Return-to-Home Modes Smart RTH; Low voltage RTH; Failsafe RTH
Safety Features Failsafe mode; Low battery voltage warning; Custom ight altitude and radius
limits; No Fly Zones; Motor Redundancy (for 6 and 8 rotor platforms); Motor
overload detection; Triple modular redundancy (for A3 Pro); Built-in data recorder
DJI GO App
(DJI Lightbridge 2 required)
Beginner mode; Auto takeo and landing; Wireless ight controller conguration;
Flight data OSD; Intelligent Flight Modes: Course Lock, Home Lock, Point of
Interest (POI), Waypoints
Supported DJI Equipment DJI aerial platforms (e.g. S900, S1000, S1000+); DJI gimbal systems (e.g.
Zenmuse X3 / X5 / X5R / XT, Z15 A7 / GH4 / 5D Ⅲ / BMPCC); DJI Intelligent Landing
Gear
●
Optimized Flight Performance (Subject to airframe type and payload)
Hovering Accuracy
(In P-Mode)
Vertical: ±0.5 m; Horizontal: ±1.5 m
Max Wind Resistance 10 m/s
Max Yaw Angular Velocity 150°/s
Max Pitch Angle 35°
Max Ascent Velocity 5 m/s
Max Descent Velocity 4 m/s
●
Electrical & Mechanical
Rated Power A3: 5 W; A3 Pro: 10 W
Rated Peak Power A3: 8 W; A3 Pro: 16 W
Operating Temperature 14° to 113° F (-10° to 45° C)

dji A3 Specifications

Flight Performance

hovering accuracy (vertical)	±0.5 m
hovering accuracy (horizontal)	±2 m
max wind resistance	10 m/s
max yaw angular velocity	150°/s
max pitch angle	35°
max ascent velocity	6 m/s
max descent velocity	6 m/s

Power and Environment

power consumption	Max 21 W (Typical Value: 0.41 A @ 51 V)
operating temperature	14° to 113° F (-10° to 45° C)