6
©
2016 DJI All Rights Reserved.
AGRAS MG-1
Quick Start Guide
3. Connectthemotor cabletotheaircraftbody. Besuretheplugis correctlypositionedand youhearaclick
indicating a proper connection.
Unfolding the Frame Arms
1. Unfoldtheframearms
1
andtightenthetwoarmsleevesateachofthejunctions
2
.
2. Identifythepositionandrotationaldirectionofthemotors.ThetopviewshowsmotorsM1toM8arrangedina
counter-clockwiseorder,withmotorsM1andM2atthefrontoftheaircraft,andmotorsM5andM6attherear.
MotorsM1,M3M5andM7rotatecounter-clockwiseasindicatedbythe“CCW”mark,whilemotorsM2,M4,
M6andM8rotateclockwiseasindicatedbythe“CW”mark.
Mounting the Sprinklers
Tools required:Apairofpliers
1. Mountonepairofsprinklersundertheleftmotors(M3andM4)andtheotherpairundertherightmotors(M7
andM8),andthentightentheM3x6screws.
2. Connectthesprinklerstothedeliverypump.
1
Threadtheopen endsofthe hosesthroughhoseclampsA(use plierstoopen upthehoseclamp if
necessary).Connectthehosestobothsidesofthedeliverypump’sT-shapeoutlet.
2
Pressthehoseclampssothattheygriptheoutletrmly.
Pump Motor Port
Pump Motor Cable
M1M2
M3
M4
M5 M6
M7
M8