dji AGRAS MG-1 - Maintenance and Regulatory Compliance

AGRAS MG-1
Quick Start Guide
©
2016 DJI All Rights Reserved.
7
3. Fixthehosestothelandinggearandframearms.
PreparehoseclampsB,M3
×
6screwsandM3
×
8screws(self-tapping)toxthehosestothearmsandlandinggear.
1
CliphoseclampsBaroundthehoseatpositionsthatneedtobexed.Thehosesshouldbexedtothe
landinggearandateachframearmjunctionthatleadstoasprinkler.
2
AttachthehoseclamptothebracketonthelandinggearlegandtightentheM3
×
6screw.
3
AttachthehoseclamptothebottomoftheframearmjunctionandtightentheM3
×
8screw(self-tapping).
Mounting the Radar Module
1. WiththeRadarStatusIndicatorfacingoutwards,alignthemountingholesandtightentheM3
×
8 screws.
2. Connecttheradarcable totheradarport ontheaircraftbody. Besureto inserttheplug inthecorrect
orientation and tighten its ring to secure.
RadarPort
RadarCable
RadarStatusIndicator