4.EnsurethattheR400BSisperfectlylevelwhenmountedandplaced.
5. Only operate in an open environment free from radio interference. Turn off
nearbydevicesusingthesamefrequenciesastheD‐RTKBaseStation(e.g.radio
transceivers).
6.Ensurethattheantennasofallthedevicesusedare
unobstructedwheninuse.
7.OnlyusegenuineDJIpartsorpartscertifiedbyDJI.Unauthorizedpartsorparts
from non‐DJI‐certified manufacturers may cause the system to malfunction and
compromise safety.
8.EnsurethattheR400BSanditscomponentsarefreefromcontamination(e.g.
water,oil,soiland
sand).
9.DONOTattempttodisassembleanypartoftheR400BSthathasalreadybeen
mountedpriortoshipping.
10.Handlethesharpendsofthetripodwithcaution.
11.Takenecessarymeasurestoprotectthebasestationandbatteriesfromwater
in rain, snow, and/or thunderstorms. Operate with caution
in severe weather
conditions.
ProductProfile
Introduction
D‐RTK 2 High‐precision GNSS mobile station (abbreviated as R400BS mobile
station) is a new high‐precision satellite signal receiver that supports GPS,
Compass,GLONASS,andGalileo4 systemswith9‐bandsatellitesignalreception,
with built‐in OCUSYNC
TM
Wi‐Fi, LAN and CAN Data transmission links are
convenientforuserstouseindifferentapplicationscenarios.TheR400BSmobile
station can be used as an RTK mobile base station to increase the positioning
accuracy of an aircraft equipped with a DJI RTK positioning system (such as
MG‐1P
RTK,PHANTOM
TM
4RTK,etc.)frommeterstocentimeters.Itcanprovides
stronganti‐magneticinterferencetoensurereliableoper ationflightunderstrong
To Next Page
Loading...
