dji D-RTK 2 - Turning on; Turning off the R400 BS; Switching the Working Modes; Linking; Linking Procedures


Turning on/ Turning off the R400BS
Pressandholdonthepowerbuttontoturnon/turnofftheR400BS.

 
Switching the Working Modes
Press and hold on the working mode button to switch the working modes and
theindicatorblinksyellowoncetoindicatethattheswitchissuccessful.
Themodeindicatorblinkingcountinthegreenlightcycleindicatesthedifferent
workingmodes.
 WorkingMode1 WorkingMode2* WorkingMode3*
ModeName MobileStation StationaryStation
(CORS)
HandheldMapper
GreenBlinkingCount Once Twice ThreeTimes

*Comingsoon.
Linking
LinkingProcedures
R400BS can work with MG‐1P RTK and Phantom 4 RTK together as a Mobile
Station. Link between the R400BS and the remote controller of MG‐1P RTK and
Phantom4RTKisrequired,andtheProcedureisalmostthesameforMG‐1PRTK