dji M300 - User Manual

Need help? Email support@fieldofviewllc.com or call 701-203-3757 x3
1
DJI M300 Integration Guide
1. Secure the GeoSnap PPK M300 mounting bracket using the 4 screws and included hex
key to the top of the drone.

dji M300 Specifications

General

Brand	dji
Model	M300
Category	TV Mount
Language	English

Summary

DJI M300 Integration Guide

Secure Mounting Bracket

Secure the GeoSnap PPK M300 mounting bracket to the drone top using 4 screws and hex key.

Attach GeoSnap PPK to Bracket

Place GeoSnap PPK onto bracket, insert tab, and turn quarter-turn studs to lock securely.

Route PPK-to-Hotshoe Cable

Attach cable routing clip and route the GeoSnap PPK-to-hotshoe module cable through it.

Connect PPK-to-Hotshoe Cable

Plug the GeoSnap PPK-to-hotshoe module cable into the 8-pin connector on the GeoSnap PPK.

Connect PPK Battery Power

Connect the red battery power connector to the GeoSnap PPK to power the device.

SKYPORT Configuration Offsets

Single SKYPORT Offsets

Provides X, Y, Z offsets for single SKYPORT configuration from bottom-center to antenna L1 phase center.

Dual SKYPORT Offsets

Provides X, Y, Z offsets for dual SKYPORT configurations to antenna L1 phase centers.