Cendence S Remote Controller
The Cendence
TM
S remote controller features DJI’s OCUSYNC
TM
2.0 technology for a maximum transmission distance of up to 4.3
mi (7 km).* Equipped with a DJI CrystalSky
TM
7.85 inch ultra-bright monitor, it displays a live HD view directly via the built-in DJI Pilot
app, providing a precise and responsive flying experience. Dual frequency* support makes the HD video downlink more stable. In
Dual Remote Controller Mode, two remote controllers control the aircraft and camera separately, even when they are up to 656 feet
(200 m) apart.
The remote controller works with a WB37 Intelligent Battery, which can be fully charged via the charging port in about 2 hours and
24 minutes with the standard charger, or with the Intelligent Battery Charging Hub in about 1 hour and 11 minutes. The maximum
run time of the remote controller is approximately 4 hours without supplying power to a monitor and with Dual Remote Controller
mode disabled.*
1. HDMI Port
2. USB Port
3. Micro SD Card Slot
4. Micro USB Port
5. Headphone Jack
6. Light-Sensitive Port
7. Power Button
8. Customizable Button (F1)
9. Setting Button
10. Customizable Button (F2)
11. Back Button
12. Battery Release Button
13. WB37 Intelligent Battery
14. Antennas
15. Monitor Mounting Bracket
16. USB Port (Reserved Port)
17. Control Sticks
18. Strap Hook
19. Focal Adjustment Knob
20. Return-to-Home (RTH) Button
21. Power Port
22. EV Setting Button
23. Shutter Setting Button
24. Aperture Setting Button
25. ISO Setting Button
26. Pause Button
27. Power Button
28. Remote Control Display
29. Camera Settings Dial
30. Customizable Button Setting Menu
31. Customizable Buttons (BA-BH)
32. Support Rig
33. Left Lever
34. Left Dial (Gimbal Pitch)
35. Flight Mode Switch
36. Handle Bar
37. USB Port
(for Mobile Device Connection)
38. HDMI A Port (for Video Output)
39. CAN Bus Port (Extension Port)
40. Micro USB Port
41. SDI Port (for Video Output)
42. Right Lever
43. Right Dial (Gimbal Pan)
44. AF Button (Autofocus)
45. Record Button
46. Shutter Button
47. Customizable Buttons (C1-C4)
* The remote controller can reach its maximum transmission distance (FCC) in an unobstructed area with no electro-magnetic interference at an altitude of about
400 feet (120 meters). The actual maximum transmission distance may be less than the distance mentioned above due to interference in the operating
environment, and the actual value will fluctuate according to the strength of interference.
To comply with local regulations, the 5.8 GHz frequency is not available in some countries and regions.
For more information about Dual Remote Controller mode, please refer to the user manual.
Maximum run time is estimated in a lab environment without supplying power to a smart device or monitor, for reference only.
To Next Page
Loading...
Need help?
General
