dji Matrice 200 V2 - Preparing the Aircraft

6
EN
11
2
3
4. Preparing the Aircraft
Mounting the Landing Gear
Mounting the Propellers
Mounting the Gimbal and Camera
Press the Gimbal
Detachment Button
to remove the cover.
Align the white and
red dots and insert the
gimbal.
Rotate the gimbal lock
to the locked position.
Check that the propellers are
secure before each ight.
Make sure to press down the gimbal detachment button when rotating the gimbal lock to remove the gimbal and camera. The gimbal lock should be
fully rotated when removing the gimbal for the next installation.
Propellers with silver
rings should be
installed on motors
with the same color
marks.
Propellers without
silver rings should
be installed on
motors without
marks.
Press the propeller
down onto the
mounting plate and
rotate in the lock
direction
until
secure.
Unfolding the Aircraft
1
2
3
Unfold the frame arm, slide the arm lock to the end of the frame
arm, and rotate it about 90° until the silver line lies within the range
of the
icon.