dji MATRICE 30 Series - Regular Maintenance; Regular Maintenance Items; Propulsion System

4
©
2022 DJI All Rights Reserved.
MATRICE 30
SERIES Maintenance Manual
Regular Maintenance
It is recommended to perform inspection and maintenance regularly by following the standards below
to keep the aircraft in a good condition and reduce safety risks.
Type Maintenance Items Maintenance Advice Period *
Basic
Maintenance
Deep cleaning, regular
maintenance items, updates and
calibrations
It is recommended to return
to the factory or contact an
authorized agent
According to users’
actual requirements
Routine
Maintenance
Deep cleaning, regular
maintenance items, updates
and calibrations, components
replacement due to wear and tear
Factory service
Per 300-hour ights
/ Per year**
Maintenance
Deep cleaning, regular
maintenance items, updates
and calibrations, components
replacement due to wear and tear,
propulsion system component
replacement
Factory service
Per 900-hour ights
/ Per three years**
* The time specied in the maintenance period or the ight time shall be whichever comes rst.
** Per year/Per three years expresses the device activation time.
For various regions, DJI will adjust the maintenance type and period. Contact your local
dealer or DJI Support for the latest service details.
Regular Maintenance Items
Propulsion System
Type Inspection Process Illustrations
Motor
Rotation
1. Unfold and secure the frame arms.
2. Rotate the rotor of the motor to check if there
is any blockage or rubbing. Observe the gap
between the rotor and stator of the motor to
check if there is any rubbing with the motor
base.
3. DO NOT y the aircraft if there is any blockage
or rubbing mentioned above. It is necessary
to return to the factory for repair.