Need help?Do you have a question about the dji FLYCART 30 and is the answer not in the manual?
General| Max Payload | 30 kg |
|---|---|
| Max Flight Speed | 20 m/s |
| Max Wind Resistance | 12 m/s |
| Intelligent Battery | Yes |
| Aircraft Type | Multi-rotor |
| Hovering Accuracy | Vertical: ±0.1 m |
| Operating Temperature Range | -20°C to 45°C |
Guide to watching the official installation video before proceeding.
Steps to remove the cargo case, straps, landing gear, and rear radar.
Install specialized landing gear, extension rods, and reattach the rear radar.
Secure the winch system using screws and connect its cable to the aircraft.
Important notes on sticker removal, screw adhesive, and landing gear usage.
Guidelines on cable usage, damage prevention, weight limits, and extension cables.
Methods for securing and hanging small cargo using ropes and hooks.
Using extension cables for large or dense cargo, including setup and checks.
Steps to calibrate the weight sensor via hovering and DJI Pilot 2 settings.
Recommendation for how often to calibrate the weight sensor for accuracy.
Explanation of Tethered Descent mode for cargo ascent and descent.
Configuration of winch system features like Swing Control and Safe Distance in the app.
How to operate the winch cable using the remote controller's right dial.
Step-by-step instructions for loading cargo when the aircraft is landed.
Detailed steps for loading cargo in the air, including securing and ascent.
Safety precautions for hook hold, unloading movement, swinging, T mode, and flight tasks.
Resolution for when the app does not show 0m cable length.
Solutions for knotted, reversed, or stuck cables.
How to resolve issues with releasing the extension cable.
Procedure to cut the cable if it's stuck and prevents flight.
To Next Page
