dji FLYCART 30

4
©
2024 DJI All Rights Reserved.
DJI FlyCart 30 Winch System User Guide
3. Install the provided landing gear that is to be used with the winch system, as well as the
extension landing rods for the landing gear and the front and back rods. Reinstall the
rear radar.
4. Attach the winch system with the M4×12 screws, and connect the winch system cable to
the payload port of the FlyCart 30.
空吊系统
PAYLOAD
1
2
• Remove the sticker on the winch system before first use.
• It is recommended to use screw adhesive on the M4×12 screws when installing
the winch system.
• The winch system landing gear must be used to avoid damaging both the radar
and the landing gear during cargo delivery.
• Make sure the extension landing rods are mounted firmly, and the rubber strap
has been tightened. Extension landing rods can be removed during transport to
reduce the size of the aircraft.