dji FLYCART 30

10
©
2024 DJI All Rights Reserved.
DJI FlyCart 30 Winch System User Guide
• Make sure the hook has a firm hold on the cargo. DO NOT reel the cable up or
down during flight.
• DO NOT move the aircraft during cargo unloading.
• If the hook is swinging severely while the aircraft is hovering, DO NOT reel up
the cable. Instead, continue to reel down the cable until the hook touches the
ground. DO NOT continue to reel down the cable after the hook is on the ground.
Otherwise, it may cause issues when the cable is being reeled up, such as the
cable being reeled up in reverse or getting stuck.
• When the cable is being reeled down, make sure that the aircraft is set to T mode
to avoid having the cargo swing.
• Flight Task cannot be used when the cable is being reeled down. When the aircraft
is hovering, reel up the cable until the length is 0 m before using Flight Task.
Troubleshooting
Scenario Resolution
Cable length displayed in the
app won’t show as 0 m
Release the cable and then reel it up. After landing the
aircraft, check if there is foreign matter or debris in the
winch system.
The cable has a knot, has been
reeled up in reverse, or is stuck
Land the aircraft and enable Repair mode to unwind
the cable manually. Disable Repair mode when
finished.
Extension cable cannot be
released after tapping the
release button in the app
Push the right dial on the remote controller to reel
down the cable manually.
Cable is stuck in trees or stuck
on something else and the
aircraft cannot fly
Tap the Cut Cable icon
to cut the cable off, ensuring
flight safety.
Specifications
Model A2EWH-30A
Weight 3.1 kg
Max Payload 30 kg (Dual Battery Mode), 40 kg (Single Battery Mode)
Cable Length 20 m
Extension Cable Length 5 m
Counter Weight 1.9 kg
Power Supply Voltage 52.22 V (Standard Voltage), 59.92 V (Max Voltage),
42 V (Min Voltage
）
Weight Accuracy ±3 kg