dji FLYCART 30

©
2024 DJI All Rights Reserved.
7
DJI FlyCart 30 Winch System User Guide
Delivery
Tethered Descent
Tethered Descent mode controls the ascent and descent of cargo via the cable.
DJI Pilot 2 Settings
In DJI Pilot 2 Camera View, tap
>
and enter the settings page of the winch system.
Swing Control When the swing angle is too great, use the Swing Control to help
lessen or eliminate the swinging.
Auto: The aircraft will move automatically to help eliminate
swinging when hovering in place.
Manual: When the swing angle of the cargo reaches the swing
threshold, there will be a prompt to enable swing control. Press
the flight pause button once to stop swing control.
Swing Warning
Threshold
When the swing angle reaches the threshold, a prompt will appear.
Safe Distance The winch system will start to reduce the reel down speed when
the cargo reaches the Safe Distance.
End-of-Reel Speed The winch system automatically slows the speed of the cable reel
down at the preset Safe Slowdown Distance.
Tethered Descent
Calibration
Tap to calibrate the winch system.
Repair Mode When enabled, repair mode allows the user to manually unwind
the cable if stuck. Pull out the cable manually or use the right dial
of the remote controller to control the cable.