EN
4
1. Preparing the Aircraft
Remove the gimbal
cover from the camera.
Unfold the front arms. Unfold the rear arms.
Unfolded
Unfold the front arms and the propellers before the rear ones. All arms and propellers
must be unfolded before takeoff.
1
2
3
Press the propellers
down and rotate until
they click in place.
Match the propellers
to motors.
Marked Unmarked
2. Charging the Batteries
Use the provided charger to fully
charge the Intelligent Flight Battery
before rst use.
Remove the Intelligent Flight Battery
Charging Time:
~1 hour 30 minutes
Charging Time:
~2 hours
Please use the ofcial 24W USB charger to charge the Smart Controller. When a
standard 24W USB charger is not available, it is recommended to use an FCC/
CE certied USB charger rated 12V/2A.
24W USB Charger
Battery Charger
USB-C Cable
Power Outlet
100 - 240V