12
Gimbal
1. Precision elements in the gimbal may be damaged in a collision or
impact, which may cause the gimbal to function abnormally.
2. DO NOT apply external force to the gimbal after the gimbal is powered on.
3. DO NOT add any payloads to the gimbal, as this may cause the gimbal
to function abnormally or even lead to motor damage.
4. Remove the gimbal clamp before powering on the gimbal. Re-install the
gimbal clamp to secure the gimbal’s position if you are going to store the
aircraft for an extended period.
Compass
To avoid possible serious injury and property damage, observe the following
rule:
1. Land immediately when severe drifting occurs in ight, i.e., the aircraft
does NOT y in straight lines.
Only calibrate the compass when the DJI GO app or the status indicator
prompt you to do so. Observe the following rules when calibrating your
compass:
1. DO NOT calibrate your compass where there is a chance of strong
magnetic interference, such as magnetite, parking structures, and steel
reinforcements underground.
2. DO NOT carry ferromagnetic materials with you during calibration such
as cellular phones.
3. The DJI GO app will prompt you to resolve the compass issue if the
compass is affected by strong interference after calibration is complete.
Follow the prompted instructions to resolve the compass issue.
Propulsion Systems
To avoid serious injury to yourself or others, which may be caused by the
rotating propellers and motors, observe the following rules:
Propellers
1. DO NOT use aged, chipped, or broken propellers.
To Next Page
Loading...
Need help?
General