14

a. Read and understand the warning messages before using the Auto-

take off and Auto-landing features.

b. Read and understand the warning message and disclaimer before

setting the altitude beyond the default limit.

c. Read and understand the warning messages and disclaimer before

switching between ight modes.

4. Land your aircraft immediately if there is an alert shown on the app.

5. Examine and check all warning messages on the checklist displayed in

the app prior to each ight.

6. Use the in-app simulator to practice your ight skills if you have never

operated the aircraft or if you do not have sufcient experience to be

comfortable operating the aircraft.

7. Beginner Mode is enabled by default when you launch the app for the

rst time. The aircraft’s altitude and ight distance is restricted when

ying in Beginner Mode. We recommend you y in Beginner Mode to

perfect your ight skills. Operate the actual aircraft only after you are

condent that you have mastered adequate ight skills.

8. Cache the map data of the area where you intend to y the aircraft by

connecting to the Internet before each ight.

Firmware

To avoid serious injury to children and animals, observe the following rule:

1. Keep children and animals at a safe distance during any rmware

upgrade, system calibration, and parameter setting procedures.

1. For safety, always update the rmware to the latest version when an

upgrade notication is shown in the app.

2. Firmware upgrade notications will prompt you to proceed with an

update immediately or to update the rmware within three days. If you

choose to ignore the current rmware update, you are required to accept

the prompted disclaimer. You further understand and agree that the

data including but not limited to ight telemetry data and user selection

records may be uploaded to and maintained on a DJI-designated server.

3. Be sure to download the rmware package le from the ofcial DJI

website. Verify the rmware package le’s integrity before upgrading.

4. Be sure to update the remote controller’s rmware to the latest version

after you update the aircraft’s rmware.

5. The remote controller may become unlinked from the aircraft after

updating. Re-link the remote controller and aircraft.

dji mavic Safety Guide

Other manuals for dji mavic