20
g. Flying over extremely dark (< 10 lux) or bright (> 10,000 lux) surfaces;
h. Flying over surfaces that can absorb sound waves (e.g., thick carpet).
i. Flying over surfaces without clear patterns or texture;
j. Flying over surfaces with identical repeating patterns or textures (e.g.
tiles with same design);
k. Flying over inclined surfaces that will deect sound waves away from
the aircraft
6. Camera calibration is required if the aircraft suffers from crashing.
Calibrate the front cameras if DJI GO app prompt you to do so.
TapFly
To prevent serious injury or property damage, observe the following
guidelines:
1. DO NOT instruct the aircraft to y towards people, animals, small and
ne objects (e.g. tree branches and power lines) or transparent objects
(e.g. glass and water).
2. Watch out for potential obstacles in your surrounding area (especially
on the rear, left, and right sides of the aircraft) and stay clear of them to
avoid accidents.
3. Be prepared to take control of the aircraft or press the “STOP” button
on press the “STOP” button on the screen or the Intelligent Flight Pause
button at all times, in case of an emergency of an emergency.
1. There may be deviations between the expected and actual paths for your
TapFly selection.
2. The selectable range on the screen is limited. You cannot make TapFly
selections near the upper or lower edges of the screen.
3. The TapFly mode may NOT function properly when the aircraft is ying
over water or snow covered area.
4. Be extra cautious when ying in extremely dark (< 300 lux) or bright (>
10,000 lux) environments.
ActiveTrack
To prevent serious injury and property damage, observe the following
guidelines:
1. Ensure there are no people, animals, small and ne objects (e.g. tree
To Next Page
Loading...
Need help?
General