dji Mini SE - Page 12

· When powering on the drone, the gimbal will perform self-check*. If the gimbal
protector is not removed, the motor may be damaged and the service life will be
affected, or even damage the gimbal and impact the flight safety after takeoff.
· Protect your DJI Mini 2 SE gimbal and camera with this protector, and it is
recommended to attach the gimbal protector during daily storage or carrying
outdoors.
* If the drone is powered on without activation, the gimbal will not rotate and run
self-check.
· Removing the Gimbal Protector
Push the lower buckle of the gimbal protector towards the camera to remove the
gimbal protector.
Note: If GIF images are not displayed properly, click here fordetails.
· Attaching the Gimbal Protector
1. Snap the buckle at the upper part of the gimbal protector into the slot on the
aircraft.
2. In the same way, snap the lower buckle into the slot at the bottom of the aircraft.