To Next Page

To Previous Page

DJI Osmo Action 4

User Manual

Wi-Fi Protocol 802.11 a/b/g/n/ac

Wi-Fi Transmitter Power (EIRP) 2.4 GHz: < 15 dBm (FCC/CE/SRRC/MIC)

5.1 GHz: < 16 dBm (FCC/CE/SRRC/MIC)

5.8 GHz: < 14 dBm (FCC/CE/SRRC)

Bluetooth Operating Frequency 2.400-2.4835 GHz

Bluetooth Transmit Power (EIRP) <3 dBm

Bluetooth Protocol BLE 5.0

[1] Before use, close the battery compartment cover and the USB-C port cover, and tighten the Lens

Protective Cover. It is recommended to install the Waterproof Case for long-duration underwater shooting

or in environments with high water impact pressure. Osmo Action 4 and its Waterproof Case have an IP68

waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it

come into contact with corrosive or unknown liquids.

[2] EIS is not supported in Slow Motion and Timelapse modes. HorizonSteady is only available when the video

resolution is 1080p (16:9) or 2.7K (16:9) with a frame rate of 60fps or below. HorizonBalancing is only

available when the video resolution is 1080p (16:9), 2.7K (16:9), or 4K (16:9) with a frame rate of 60 fps or

below.

[3] Tested at room temperature (25°C/77°F) and 1080p/24fps (16:9), with RockSteady on, Wi-Fi o, and screen

o. This data is for reference only.

Other manuals for dji OSMO ACTION 4

Questions and Answers:

Need help?

Do you have a question about the dji OSMO ACTION 4 and is the answer not in the manual?

General