dji Phantom 2 Vision + - Page 6

©2014 DJI Innovations. All Rights Reserved.35 |
position. Users should follow their loc a l regulations accordingly.
FCCCE
（
1
）
When adjusting the potentiometer knob to i ts limit position, be very careful to prevent
damaging the potentiometer knob. Do not apply too much force during this adjustment. Also be
sure to use the correct sized screwdriver.
（2） CE compliant devices have an effective communication range of 300 meters in open spaces due
to power limitations. Be sure to watch your fight distance as the PHANTOM 2 VISION+will
enter Failsafe mode (auto-landing or go home and land) if it fliesbeyond this range.
（3） FCC compliant devices have an effective range of 500 meters in open spaces. Be sure to watch
your fight distance as the PHANTOM 2 VISION+will enter Failsafe mode (auto-landing or go
home and land) if it fliesbeyond this range.
（
4
）
Pay attention to and follow local laws and regulations.
（
1
）
The remote controller comes set for CE compliance up delivery as the default setting.
（2） It is recommended to use a flathead screwdriver of Φ2.4mm for adjustment.
（
3
）
There is another potentiometer reserved.