dji Phantom 3 SE - Prepare the Remote Controller; Prepare for Takeoff

EN
5
●
Tighten the propellers with both hands before each ight.
Activate your Phantom if you are using it for the rst time. This requires an internet connection.
4. Prepare the Remote Controller
5. Prepare for Takeo
Unfold
Press the button on
the side of the Mobile
Device Holder to
release the clamp.
Place your mobile device into
the clamp and adjust it so
that the mobile device is held
securely in place.
Remove the
gimbal clamp
from the camera.
Remove the
gimbal packing.
Launch the app.
Black propeller nuts go on motors with black dots.
Silver propeller nuts go on motors without black dots.
Power on the remote
controller and the aircraft.
On your mobile device, select
‘Phantom3SE_XXXXXX’ from
the Wi-Fi menu and enter the
default password ‘12341234’.
Internet
2
1
DJI GO
App
DJI GO
App
Phantom3SE_XXXXXX