To Next Page

To Previous Page

2. The remote controller will sound an alert if it is powered on but has not been used for five

minutes. It will automatically power o after a further 30 seconds. Move the control sticks or

perform any other remote controller action to cancel the alert.

3. Make sure the antennas of the remote controller are unfolded and adjusted to the proper position

for optimal transmission.

4. Contact DJI Support to repair or replace the antennas if they are damaged. Damaged antennas

greatly decrease performance.

5. Link the remote controller and the aircraft every time the aircraft is changed.

6. Make sure to power o the aircraft before the remote controller.

7. Fully charge the remote controller every three months.

8. Charge the remote controller immediately if the power level reaches 0%. Otherwise, the remote

controller may be damaged due to being over discharged for an extended period. Discharge the

remote controller to between 40% and 60% if stored for an extended period.

9. DO NOT cover the air vent or the air intake on the remote controller. Otherwise, the performance

of the remote controller may be aected due to overheating.

10. Contact DJI or a DJI authorized dealer to replace the components of the remote controller if

damaged. DO NOT disassemble the remote controller without the assistance of a DJI authorized

dealer.

Other manuals for dji RC Pro

Questions and Answers:

Need help?

Do you have a question about the dji RC Pro and is the answer not in the manual?

General