54
©
2020 DJI All Rights Reserved.
ROBOMASTER EP Core User Manual
1. Scratch page: Tap to view Scratch programs.
2. Python page: Tap to view Python programs.
3. Import DSP le: This function is available on Android, Windows, and Mac devices. DSP les can
be imported to iOS devices by using AirDrop.
4. Cloud space: Tap to view programs in the cloud space.
5. Program name: Displays the name of the program.
6. If the program is set as a general program, the program type is not displayed. The program type
is only displayed if it is set as a custom skill or autonomous program.
7. Program settings: Tap to select the program type, set the program as a custom skill, set the
program as an autonomous program, backup on the cloud space, share with other users, and
rename or delete the program.
A B C D E F HG
8. Tap to create a new program.
A. Programming modules button: Tap the corresponding icon to program System, LED Effects,
Chassis, Smart, Armor, Mobile Device, Media, Commands, Operators, and Data Objects.
B. Programming window button: Drag programming blocks into the window to create a program.
C. Display button: Tap to turn the FPV on or off.
D. Switch button: Tap to switch to view the programming block as Python code.
E. Run button: Tap to run the program.
F. FPV window: See the current FPV.
G. Status information: View the current status information of the robot.
H. FPV button: Tap to enter the FPV in full screen
EP Core cannot run programs related to the blaster or gimbal. It is recommended to connect
the blaster or gimbal rst.
To Next Page
Loading...
