dji SPARK REMOTE CONTROLLER C2 - Flight Operations; Flight Controls; Takeoff and Landing Procedures; Specifications

5
EN
4. Flight
The default Stick Mode is Mode 2. In Mode 2, the left stick controls the aircraft's
altitude and heading, while the right stick controls forward, backward, and left and
right movements.
Specications
Operating Frequencies 2.412-2.462 GHz, 5.745-5.825 GHz
Max Transmission Distance
(Unobstructed, free of interference)
2.4 GHz: 1.2 mi (2 km, FCC),
0.31 mi (0.5 km, CE), 0.31 mi (0.5 km, SRRC)
5.8 GHz: 1.2 mi (2 km, FCC),
0.19 mi (0.3 km, CE),0.75 mi (1.2 km, SRRC)
Operating Temperature Range 32° - 104° F (0° - 40° C)
Built-in Battery 2970 mAh
Transmitter Power (EIRP) 2.4 GHz: 26 dbm (FCC), 18 dBm (CE),
18 dBm (SRRC)
5.8 GHz: 28 dbm (FCC), 14 dBm (CE),
26 dBm (SRRC)
Operating Voltage 950 mA @3.7 V
Supported Mobile Device Size Thickness supported: 6.5 mm-8.5 mm
Max length: 160 mm
The Combination Stick Command (CSC)
can be used to start or stop the motors.
Landing
Pull the left stick down slowly until you touch the ground. Hold the left
stick down for a few seconds to stop the motors.
Takeoff
Push the left stick up
slowly to takeoff.
Up
Left Stick Right Stick
Down
Forward
Backward
Left Right
Turn RightTurn Left