dji SPARK User Guide

5
EN
1. Connecting to a Power Source
Connect the Spark Battery Charger to a power outlet (100–240 V, 50–60 Hz), then
connect the Charging Station to the Spark Battery Charger.
2. Connecting the Batteries
Toggle the Securing Board Switch to open the board
and then align the battery with the Battery Slot Track
and insert the battery as shown below. Push the
battery in the direction of arrow
2
to secure it in
place.
Align the external charging contact on the aircraft’s
battery with the Charging Station’s contact, and
then insert the aircraft into the station. After charging
starts, the aircraft will power off.
Close the securing board and ensure the board
is fastened when hearing a “click” and seeing the
switch return to its original position.
1
2

dji SPARK Specifications

Operating Environment

max speed	31 mph (50 kph)
operating temperature	32° to 104° F (0° to 40° C)
charging temperature	41° to 104° F (5° to 40° C)

Camera

sensor	1/2.3” CMOS
effective pixels	12 Megapixels
video recording modes	FHD: 1920×1080 30p

Power

charger input	100-240 V, 50/60 Hz, 0.5 A
charger output	5 V 3 A / 9 V 2A / 12 V 1.5 A
battery capacity	1480 mAh

Remote Control

operating frequency	2.4G / 5.8G
max transmission distance (Wi-Fi)	100 m (Distance), 50 m (Height)
max transmission distance (Remote Controller)	2000 m

Weight and Dimensions

weight	300 g
dimensions	143×143×55 mm