dji Thumb Controller User Manual

©
2015 DJI. All Rights Reserved.
19
Ensure that your computer is connected to the internet
Close
all antivirus programs and network rewalls
Ensure that the device is turned on before beginning the
update process
Do not disconnect the USB cable until the update is complete
If the Thumb Controller fails to update, follow the steps below:
1. Press and hold the override button.
2
.
Use the USB cable to connect the Thumb Controller to the computer.
3. Now, release the override button and wait for the connection to
be established.
4. Click the
“Update” button after the Thumb Controller has been
successfully connected to the Assistant. The Thumb Controller
will be operate normally after the update is complete.

dji Thumb Controller Specifications

General

Brand	dji
Model	Thumb Controller
Category	Camera Accessories
Language	English