dji Thumb Controller - Firmware Updates

18
©
2015 DJI. All Rights Reserved.
Updating the
Thumb Controller and the Receiver
You can nd the latest rmware version information on this page
and update the rmware by following the steps below:
1
.
Us
e the Micro-USB cable to connect the Thumb Controller to
y
our computer, then wait until the indicator in the Assistant blinks
blue.
2. Click “Update.”
3.
Wait
for the download to nish.
4.
Click
“Update” again and then click “Conrm.”
5. After the update is complete, turn the Thumb Controller off and
then on again.
6. Repeat this process with the Ronin-M or the
Ronin External
Receiver, depending on your model.