v.210818 | 15
SAFETY & OPERATION
SAFE PRACTICES & GENERAL INFORMATION
GENERAL INFORMATION
• Run all contents in the hopper through the machine before shutting the engine o to prevent
loose wood from lodging between blades, causing a jammed drum before your next engine
start-up.
• Unplug the spark plug, remove small side cover with 2 nuts and turn the drum counter-
clockwise to free up wood stuck in the blade.
NEVER RUN CHIPPER WITH CHUTES OPEN. THIS CAN CAUSE INJURY
OR DEATH.
READ AND OBEY ALL WARNING LABELS ON THIS MACHINE.
ENGLISH
To Next Page
Loading...
