DK2 Power OPC513 User Manual (English)

Questions and Answers:

U
ucastilloAug 7, 2025
Why is my DK2 Power OPC513 engine losing power?
- K
  Kimberly JonesAug 7, 2025
  If your DK2 Power Paper Shredder engine isn't running smoothly or lacks power, try these steps: * Ensure the throttle lever is in the “RABBIT” position and turn off the choke. * Check if the air filter is clean; if dirty, replace it. * Inspect the spark plug; replace it if it’s fouled or cracked. * If the spark plug is oily, remove it, use a rag to cover the plug hole, and pull the recoil cord several times to remove oil from the cylinder. Then, clean and reinsert the plug. * Make sure you're using fresh, clean, unleaded gas, and replace old gas. Use a fuel stabilizer if storing gas longer than 30 days. * Confirm the engine has the correct amount of clean oil.
J
julievalenzuelaAug 16, 2025
What to do if DK2 Power Paper Shredder engine smokes?
- T
  Tamara TaylorAug 16, 2025
  If your DK2 Power Paper Shredder engine is smoking, take the following steps: Begin by checking the oil level and adjusting it as necessary. Next, inspect the air filter and either clean or replace it, depending on its condition. Ensure you are using the correct type of oil, as a too-light oil may cause smoking at certain temperatures. Lastly, inspect the cooling fins and clean them if they are dirty.
M
Mark RichardsAug 27, 2025
How to restore chipping power on my DK2 Power Paper Shredder?
- S
  susan74Aug 27, 2025
  If your DK2 Power Paper Shredder doesn't seem to have full chipping power, the blades may be dull. Reverse them to the sharp edge or replace them. Also, check the drum for any blockages.

DK2 Power OPC513 Specifications

General

Auto Start/Stop	Yes
Overload Protection	Yes
Jam Protection	Yes
Shred Size	4mm strips
Throat Width	220mm

Summary

Warranty Information

What is Covered

Details warranty coverage for the 2-year engine and 1-year commercial aspects.

Registration and Transferability

Serial number registration is required; warranty is non-transferable.

Warranty Exclusions

Lists items and conditions not covered by the warranty, such as misuse and expendable parts.

Warranty Procedure

Outlines the process for making a warranty claim via phone or website.

Damaged Freight Policy

Instructions on handling product damage incurred during shipping.

Returns Policy

Procedure for returns before gas and oil are added.

Defective Product Resolution

Contact information for resolving issues with products after use.

Online Resources

Learn More About Your Product

Links to product web page for details, photos, videos, specifications, and support.

Purchasing Replacement Parts

Information on where to buy replacement parts online.

Product Parts Support

Process for requesting parts not listed online.

View User Manual on Phone

Instructions to access the user manual on a mobile device via QR code.

Technical Specifications

Section I: Safety

Safety Conventions

Defines DANGER, WARNING, and CAUTION symbols and their meanings.

Before Operation Safety

Pre-operation checks and warnings, including operator responsibility and PPE.

Safety Decals

Emphasizes the importance of maintaining readable safety warning decals.

General Safety

Covers general safety rules for operation, work area, and maintenance.

Fire Prevention

Safety precautions related to gasoline, sparks, and refueling.

Towing Safety

Guidelines for safely towing the equipment, including speed limits.

Proper Maintenance and Storage

Safe practices for maintaining and storing the equipment, including fuel handling.

California Proposition 65

Warning about chemicals in engine exhaust and product components.

Operation Safety

Specific safety rules during equipment operation, including operator zone.

Section II: Assembly

Step 1: Check the Packing

Instructions for unpacking and inspecting all parts for damage or missing items.

Step 2: Axle Installation

Procedure for installing the axle using the provided bolts.

Step 3: Wheel Installation

Instructions for installing the wheels and using locking pins.

Step 4: Drop Stand & Tow Bar

Steps for installing the drop stand and the tow bar.

Step 5: Side Feed Chute

Procedure for installing the side feed chute with bolts.

Step 6: Expulsion Chute

Mounting the support frame and expulsion chute using provided hardware.

Step 7: Top-Loading Feed Chute Handle

Installing the handle for the top-loading feed chute.

Step 8: Top-Loading Feed Chute

Mounting the top-loading feed chute.

Section III: Operation

Operating Instructions

Crucial safety and operational guidelines before starting and during use.

Kohler Engine Details

Details about the specific engine model, including controls and oil recommendations.

Starting Your Equipment

Step-by-step guide for starting the chipper shredder engine.

Stopping Your Equipment

Instructions on how to safely shut down the equipment.

Maintenance

Regular Maintenance Checklist

Schedule and procedures for routine maintenance tasks.

Troubleshooting

Troubleshooting Table

Common problems, possible causes, and solutions for the chipper shredder.

Section IV: Parts & Schematics

Parts List

A detailed list of all parts with item numbers, part numbers, and quantities.

Schematics

Diagrams illustrating the assembly and exploded views of the equipment.

Related product manuals

DK2 Power OPC513 User Manual

Table of Contents