v.230223 | 7
SAFETY CONVENTIONS
DANGER! This indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING! This indicates a hazardous situation, which, if not avoided, could result in death
or serious injury.
CAUTION! This indicates a hazardous situation, which, if not avoided, may cause minor or
moderate injury.
ADDITIONAL INFORMATION AND POTENTIAL CHANGES
We reserve the right to discontinue, change, and improve our products at any time without notice
or obligation to the purchaser. The descriptions and specifications contained in this manual were
in eect at printing. Equipment described within this manual may be optional. Some illustrations
may not be applicable to your equipment.
BEFORE OPERATION
WARNING! Read and understand the complete User Manual before assembling
or using this product. Failure to comprehend and comply with warnings,
cautions and instructions for assembly and operation could result in serious
injury or death.
WARNING! Do not permit children to operate this equipment at any time. Do not permit
others that have not read and understood the complete User Manual to operate this
equipment. Operation of power equipment can be dangerous. It is the sole responsibility
of the operator to understand the assembly and safe operation of this product.
DANGER! INTENDED USE: Do not use this equipment for any purpose other than chipping
wood, for which it was designed. Any other use is unauthorized and may result in serious
injury or death.
DANGER! PERSONAL PROTECTIVE EQUIPMENT: When operating
this equipment, it is essential that you wear safety gear including
goggles or safety glasses, steel-toed shoes and tight-fitting gloves
(no loose cus or draw strings). Always wear ear plugs or sound-
deafening headphones to protect against hearing loss when
operating this equipment.
CAUTION! Do not wear loose clothing or jewelry that can be caught
by moving parts of the equipment. Keep clothing and hair away from
all moving parts of the equipment.
ENGLISH
To Next Page
Loading...
