Need help?Do you have a question about the DLE 65 and is the answer not in the manual?
Inspect propeller, engine mount, and ensure screws are tight. Use Loctite for secure fastening.
Use shock absorbers for testing. Running engine on aircraft is recommended for break-in.
Maintain a safe distance from the propeller when the engine is running.
Details engine HP, RPM, static thrust at different altitudes, and propeller compatibility.
Includes engine displacement, bore/stroke, compression ratio, weight, and ignition voltage.
Guidance on adjusting idle speed, low-speed, and high-speed needles for optimal performance.
Step-by-step procedure for starting the engine, including choke and throttle usage.
Specifies fuel type and the recommended petrol to oil ratio (30:1).
Instructions for breaking in the engine at 4000 RPM for 2 hours.
Check fuel lines for leaks and periodically clean the carburetor fuel screen.
General| Displacement | 65 cc |
|---|---|
| Carburetor | Walbro |
| Fuel Type | Gasoline |
| Cylinders | 1 |
| Type | 2-Stroke |
| Ignition | CDI |
| Spark Plug | NGK CM6 |
To Next Page
