Please Note:
Prior to the drilling, make sure there is no cable or other pipelines on/in the wall to
avoid damage. Remember that the screws on the wall should be fixed and firm to ensure
the safe installation of the electric heater on the wall. Please note the safe distance
mentioned below.
• During wall-hanging installation, ensure the installation height is at least 15 cm or
more from the ground and no less than 50 cm away from the ceiling.
D
B
C
A
1
D
C
A
B
4. To fix the the heater on to the wall, hold the sides of the product and position the
holes A & B on the back of the product to line up with the bracket hooks on the wall.
Then push the unit on to the bracket hooks and slide in the direction of the arrow (1)
until the unit sits securely on the bracket hooks. The hook brackets on the base of
the unit are there to provide a spacer so the unit sits off the wall.
To Next Page
Loading...