EasyManua.ls Logo

DNT IPdio - Audio Output Options; Earphone and Analog Outputs; Digital Audio Outputs; Powering the Radio On;Off

DNT IPdio
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
using remote control.
Requesting
a
station
that
is
currently
unavailable
on-line
If you want to listen to a particular radio station which is currently not available on line, you can visit the
Reciva website at http://www.reciva.com/ and put in a request to add the station to the list.
Switch
the
radio
OFF
and
ON
To
switch
off,
press
POWER
once
and
the
clock
will
be
displayed.
To
switch on,
press
STANDBY
once
and
the
radio
will
take
up
to
60
seconds
to
start playing
again,
as
it
finds
the
radio
station
you
were
last
connected
to
and
loads
it
into
the
buffer.
Audio output
The radio unit has the following audio output jacks available:
- 6.35mm stereo earphone output
- Analog RCA line out to connect to the external Hi/Fi system
Note: The audio output on FM will only pass through the Analog RCA line out
- Optical Output: Toslink digital audio output and coaxial digital audio output to connect to the external Hi/Fi
system

Related product manuals